sarasotausmc
12-06-2006, 05:37 PM
Most of you know this already, and what I'm posting is nothing new to you guys, but, I'm happy with the result.
After only planning on changing the transmission mount, ended up dropping the transfer case today too, by repositioning the spacers from over to under the frame on the cross member. Easy job. I should have done this when I put the lift on.
But, what it did for me, besides fixing the twisting the tranny/transfer case, it noticeably fixed my pinion angle, and got rid of most of the vibrations that I could never figure out.
Tomorrow, torque it all down and start on the lights.
After only planning on changing the transmission mount, ended up dropping the transfer case today too, by repositioning the spacers from over to under the frame on the cross member. Easy job. I should have done this when I put the lift on.
But, what it did for me, besides fixing the twisting the tranny/transfer case, it noticeably fixed my pinion angle, and got rid of most of the vibrations that I could never figure out.
Tomorrow, torque it all down and start on the lights.